NIIMBOT M Label 8 × 25mm + 75mm tail PP - Wrap Around (210 labels) - Suits 8mm to 24mm diameter

These self-laminating wraparound labels are designed for durable identification of cables, wires, and cylindrical surfaces. The format combines a printable zone with a transparent wrap section, protecting printed content from abrasion and environmental exposure.

Key Features

• Self-laminating design — Transparent tail wraps over the printed area, sealing and protecting content from wear, moisture, and handling.
• 8 × 25 mm printable zone — Compact area suited to identifiers, codes, and short descriptions.
• 75 mm transparent tail — Provides full overwrap protection and secure adhesion around cylindrical surfaces.
• Polypropylene (PP) construction — Flexible material conforms to cables, hoses, and tools without cracking or lifting.
• High-yield roll (210 labels) — Suitable for batch labelling across installations and maintenance workflows.
• Thermal transfer compatible — Requires ribbon printing to ensure durable output beneath the protective layer.

Cable Diameter Selection Guide

The effectiveness of this label format depends on matching the cable diameter to the printable and tail sections of the label.

• Optimal diameter (~8 mm) — The 25 mm printable area wraps approximately once around the cable, with the 75 mm tail forming a clean protective laminate layer. This provides the most balanced result for readability and protection.
• Supported range (8 mm to 24 mm) — Within this range, the label will wrap securely, with the tail providing adequate overlap to seal the printed section.
• Larger diameters (>24 mm) — The tail length becomes insufficient to fully laminate the printed area, reducing protection and adhesion reliability.
• Smaller diameters (<8 mm) — The label will wrap multiple times around the cable, increasing thickness and bulk, but still providing strong print protection.

As a general rule:

• Printable area designed to wrap once around the object
• Transparent tail provides protective overwrap
• Total wrap length defines the upper diameter limit

Application Context — Protected Identification on Cylindrical Surfaces

This format is used where printed labels must remain legible despite handling, abrasion, or environmental exposure. The printed information is applied directly to the cable or surface, then sealed beneath the transparent layer, preventing direct wear on the print.

Typical applications include wire identification, hose marking, multicore cables, and tool labelling. The wraparound format ensures the label conforms to the surface while maintaining a readable and protected identification field.

The label can also be applied to non-electrical cylindrical objects where durable identification is required, including workshop tools and equipment. Performance depends on correct diameter matching and appropriate ribbon pairing.

A self-laminating wrap label that protects printed content by sealing it beneath a transparent outer layer, optimised for cylindrical surfaces within a defined diameter range.

Specifications